Sold Water Changing Station

Bunkers

Non-member
Pickup in Medford (by Malden)

$380 with pump
or
$280 without pump
  • Moving, and selling my water changing station, I built this for my reefer 425xl, and couldn't imagine life without it lol.
  • Store RO/DI in right tank, use left tank for mixing salt water, and then pump water to tank.
  • Cost me $800+ in parts ($270 for containers, $220 for pump, $100 for ball valves, and other misc parts).
  • PM me for more details or questions.
-Joe

Water changing station - $380 with pump (or $280 without pump)
Dual 40 gallon (19" x 40") U.S. Plastic polyethylene containers, with Lids
MD-20RXT - 822 GPH - Iwaki Japanese Pump
Schedule 40 1" blue pvc pipe, with sch 80 connections
4 x 1" Cepex ball valves
RO/DI float valve (not installed, but could upon request)
3/4" braided vinyl tubing, 17'

1593542331263.jpeg


1593542405460.jpeg


1593542676670.jpeg
 
Last edited:
Want to build your own?
I also have 2 x 25 gallon equivalent containers, with lid, never used. I paid $230 ($149 + $81 shipping).

$140 for pair, with lids
2 x 25 Gallon
Polyethylene Tanks - 19" Dia. x 26" High, from U.S. Plastic
2 x lids

1593548186141.jpeg
 
Last edited:
Question if I had this hooked up to an RODI system in my basement, could this pump 50ft of tube to the 1st floor?
 
I doubt it, you'd most likely need a bigger pump, I could point you in the right direction to selecting one. I put a union at the pump so its easy to swap out, might need to fine tune a little if height is different. I could do $350 without the pump.
Thanks, Joe
 
Upcoming Events

April 21, 2024
Paul B
Club Meeting

Back
Top