SDK
Non-member
I'm going to pull this all out and take pics over the long weekend, but it's enough of a great deal to get it listed for someone who can use it and wants to act quickly. I am just looking for $100 to get it out of my garage. Tank was up and running a month ago. I just upsized.
40B with all glass overflow. It has three drilled, bulkheaded 1" holes. I have one plugged, and tank is set up with two drains (herbie) and a separate return line. Back of tank is painted dark blue and all drain lines inside the glass overflow are matching blue PVC. I have a DIY net top for it as well that could use some touch up paint
20L sump with a Fiji Cube deluxe sump kit installed. Two sock holders, adjustable water level, refugium section, etc,
All plumbing for drain lines and return are included, along with an appropriately sized Rio return pump! Both drain lines have shut off valves and the main line valve is a top of the line Cepex GV. The return line also has a top quality one way gate valve installed. I would recommend that you spend $5 on new bulkhead gaskets while you have it apart, but otherwise this tank is "plug and play" as far as getting it set up and and circulating. The plumbing cost more than I am asking for the entire setup.
Stand is real hardwood, not particle board, and in great shape. I refinished it in dark cherry when I set it up. the two doors are magnetic so they come fully off. I mounted a matching wood medicine cabinet to the side that held my Apex. It would also be good for close at hand storage if you do not have a controller.
First $100 takes it all. Tank, stand return pump and complete plumbing...
40B with all glass overflow. It has three drilled, bulkheaded 1" holes. I have one plugged, and tank is set up with two drains (herbie) and a separate return line. Back of tank is painted dark blue and all drain lines inside the glass overflow are matching blue PVC. I have a DIY net top for it as well that could use some touch up paint
20L sump with a Fiji Cube deluxe sump kit installed. Two sock holders, adjustable water level, refugium section, etc,
All plumbing for drain lines and return are included, along with an appropriately sized Rio return pump! Both drain lines have shut off valves and the main line valve is a top of the line Cepex GV. The return line also has a top quality one way gate valve installed. I would recommend that you spend $5 on new bulkhead gaskets while you have it apart, but otherwise this tank is "plug and play" as far as getting it set up and and circulating. The plumbing cost more than I am asking for the entire setup.
Stand is real hardwood, not particle board, and in great shape. I refinished it in dark cherry when I set it up. the two doors are magnetic so they come fully off. I mounted a matching wood medicine cabinet to the side that held my Apex. It would also be good for close at hand storage if you do not have a controller.
First $100 takes it all. Tank, stand return pump and complete plumbing...
