Sdeluca10
Non-member
I used to manually dose, but not on a consistent basis. Never really had a system set and fell off of it. I have been watching videos and doing research and trying to dial myself in for a self dosing system. Here’s where I’m at right now.
For my first time ever, I just setup a jebao auto dosing pump. (4 channel but only using 3)
I had been struggling with nitrates for a while but I finally figured out what I was doing wrong and I now have them under control under 20 and still lowering.
Current parameters
Calcium 397
Alk 9.5
Mag 1110
Using ESV B-ionic calcium/alkalinity 2 part
And ESV b-ionic magnesium
Gonna start off with daily dosing:
10ml each for the 2 part
300ml for the mag
My target parameters are
Cal 420
Alk 10
Mag 1350
I should mention it’s about 170 gallons total volume. And I used BRS calculator to come up with those dosing numbers.
Any thoughts, input, advice is welcomed.
Using salifert test kits for alk and mag. Have Hanna testers for calcium and nitrate.
For my first time ever, I just setup a jebao auto dosing pump. (4 channel but only using 3)
I had been struggling with nitrates for a while but I finally figured out what I was doing wrong and I now have them under control under 20 and still lowering.
Current parameters
Calcium 397
Alk 9.5
Mag 1110
Using ESV B-ionic calcium/alkalinity 2 part
And ESV b-ionic magnesium
Gonna start off with daily dosing:
10ml each for the 2 part
300ml for the mag
My target parameters are
Cal 420
Alk 10
Mag 1350
I should mention it’s about 170 gallons total volume. And I used BRS calculator to come up with those dosing numbers.
Any thoughts, input, advice is welcomed.
Using salifert test kits for alk and mag. Have Hanna testers for calcium and nitrate.
Last edited: