maxfischer
Instigator
I just set up some new (to me anyways) Tunze 6055's on my tank, and have no idea how to set the controller. Anyone have this same unit?
Anyone using a Tunze 7094?
- Thread starter maxfischer
- Start date
customclimates
Non-member
I have mine set like this. It gives a nice alternate flow between the two power heads. When channel 1 is at a higher set power level the other channel is at the lower setting and so on. You must plug the power heads into different channels. Do not plug them both into channel one. One in channel one and the other in channel two.
Pulse set to 11 o’clock
interval dial set to 5 o’clock
interval side switch to 1-7 min
mode side switch to the middle position
channel #1 top power dial set to 3 o’clock
channel #1 bottom power dial set to 6 o’clock
reverse the power dials for chanel two / the top to 6 and bottom to 3 ….
Hope this helps as you can go from there. It is my perfered setting for my Tunzes.
Pulse set to 11 o’clock
interval dial set to 5 o’clock
interval side switch to 1-7 min
mode side switch to the middle position
channel #1 top power dial set to 3 o’clock
channel #1 bottom power dial set to 6 o’clock
reverse the power dials for chanel two / the top to 6 and bottom to 3 ….
Hope this helps as you can go from there. It is my perfered setting for my Tunzes.
