Aqua Controller Moonlights and Waves.../

[grendel]

Ok, so major upgrade day... still struggling with some of it.

Installed an AC3Pro, 4LED Lunar SIM and an AquaSurf with two Tunze6055's.

Got the basic functions of my AC2 back, but need to get the other two items...

Anyone happen to know the default switch settings of the Lunar SIM and AquaSurf?

I looked through the manuals... I need to get the addresses from the two devices and Mr. Brainiac did a wonderful install on the back of the display hood and can't get to the switches to determine the address of either device...

 

[Reef55]

I think the default is all switches in the off position... manual says which address that corresponds to. Hopefully that will be it

 

[grendel]

I think the default is all switches in the off position... manual says which address that corresponds to. Hopefully that will be it

Eh, I am going to take them down and set them correctly. Now neatening wiring and such.

BTW, my LED lights on the LunarSIM.

 

[grendel]

Eh, I am going to take them down and set them correctly. Now neatening wiring and such.

BTW, my LED lights on the LunarSIM.

Ok, so I took it down... I set the Lunar SIM to all switches up = D4?

AquaSurf is both switches up and I am using P3 and P4 = E3 and E4?