Linking Tunze's?

[jah-hoeva]

I have two of the Tunze 6055's with the controllers linked with the tunze cable. When I set one to external control and to pulse, they both pulse on and off together (both on, both off). How do I get them to alternate?

 

[letoan]

Did you add "Synchronize: Disable" to your profile?


Sent from my iPhone using Tapatalk

 

[jah-hoeva]

Are you referring to linking up to an Apex? I'm just referring to the controllers that come with the new tunze dc powerheads, and linking two together with the tunze cable.

 

[this is me]

I also have the same built-in controller on my 6255s. I haven't found a way to anti-sync them through the Tunze. You may want to ask Roger and Tunze on RC, he's very good at responding.
As of right now, I'm using my Profilux to control these Tunze.

 

[jah-hoeva]

Got my answer from the Tunze subforum on RC. I'll post it here incase anyone else is interested.

Turbelle® controller in the inverse operation (3)
If a second Turbelle® pump (or Wavebox) is
positioned on the opposite side of the aquarium,
the inverse operation must be activated on the
controller. To do this, press the „food timer“ button
for more than 5 seconds. Visually, the function will
be indicated through a blinking of the „select“ LED.
To switch back to the parallel operation (factory
default setting), the „food timer“ button must be
pressed again for more than 5 seconds, which will
cause the LED to be lit constantly. Note: The inverse
function cannot be switched to the “external control“
function or during the „auto adjust“ operation.

 

[this is me]

You need an additional cable for this right? To link the two pumps together?

 

[jah-hoeva]

Yes. It plugs into the tops of the controllers. I grabbed mine from BRS on black Friday for like $8.