Sequence Dart Dimension

[Jim Tansey]

Can anyone tell me the dimension from the flat surface the pump would sit on up to the CENTERLINE of the inlet fitting for the Sequence Dart pump. If you have this pump please be careful with the measurement as I will drill my sump using this dimension.

Thanks,

Jim

 

[ScottM]

are you running a clear housing? the new pumps do not have the clear housing and may be a different height.
http://www.mdminc.com/Reeflo.htm

 

[Jim Tansey]

Scott,

I don't have the pump yet.

Jim

 

[ScottM]

unless it is on someones shelf or its used, chances are its not a clear housing.

I put a rubber pad under mine and took that into account.
are you running a 2" bulkhead for it?
I can measure mine when i get home.
I have a 1 1/2" bulkhead drilled for one and a 2" bulkhead for another I can measure both for you.
but its a clear housing.
Clamm has a black housing,
I can measure his to compare.

 

[Jim Tansey]

I plan to use a pad also and will add that thickness to the dimension, I am using a 2 inch bulkhead for the inlet but if you give me the centerline dimension my bulkhead size will not factor in. The dimension I need is the vertical distance from the bottom of the pumps mounting feet to the centerline of the input fitting.

Thanks,

Jim

 

[Jim Tansey]

Bump; can anyone help I'm trying to drill my sump today.

Jim

 

[marco67]

at the store now ..I can measure one up for you if you want give a call.