OM help/suggestions wanted/needed

[skyedolphan]

OK here is (I hope anyway ) an attachment of a drawing that Rob did for my ocean motions 4 way ..
seeing he doesnt have 1 and I have never worked with one does this look about right ?
any suggestions on making it better? or modifications?

 

[MikeG]

Looks fine, just make sure the intake is appropriately sized for the size of the pump. I also put unions right at the OM so I can easily modify plumbing if needed.

 

[skyedolphan]

Im running it off a blueline 70

so add 1 more union?

 

[MikeG]

I just felt it would make it easier if I ever had to take the OM apart to minimize all of the tubing attached to it. 1" unions are pretty cheap. It's the ball valves that get expensive and I set mine up just like you have it. One at every output to control flow and to be able to close them of you need to remove the pluming for some reason. And one on each side of the pump to be able to take it out for maintance.

Everything you need is there.

 

[RobboT]

Sorry Dawn - that last "G" on the list of parts should have been a "J"

 

[Andy O]

Perhaps you may want to ask Paul at OM for some feedback.

 

[skyedolphan]

LOL Rob thats OK I figured it out LOL