Here is a simple sump and Refugium system. It 40-gallon long tank with Gen-X 4 pump for return. It as a swing check valve on top of the return pump. A PM Bullet-2 with another Gen-X 4 for the protein skimmer. This going to fit inside of a 150-gallon tank stand, the dimension inside is 72" x 17 1/2" wide. The float valve is set at 8” from the bottom of the tank. The two separate walls for Refugium are 6” high. The first chamber for drainage, the wall is set at 11” from the right and sit up 2 ¾” high. The first wall for the Refugium is set at 13” from the right. On the return side, the second wall for the Refugium is set at 11” from the left. The return chamber wall is set at 9 ½” from the left and sit up 1 ½” high. Here are some pictures of the sump and Refugium system.
Any question fill free to ask.
Daniel
Any question fill free to ask.
Daniel